Support

Zurotech PCMCIA TV Tuner Card

FAQs

Installation Instructions

Drivers

If you still have more questions, we would like to help you in person.
Send email to support@zurotech.com or call (510) 413-1096.

Zurotech TV Tuner Box

FAQs

TV Box Installation Procedure TV Box Remote Control guide
  1. Power off Computer and LCD (or Monitor).
  2. Connect the VGA “Y” cable to Computer, LCD & TV Boxà Connect the short (split) cable to LCD/Monitor, connect the long (split) cable to Computer and connect the remaining cable connector to TV Box as shown above.
  3. Connect the stereo audio output cable terminal of sound card with the “PC-AUDIO” outlet of the receiver on the TV Box.
  4. Connect “LINE OUT” outlet on TV Box to speakers or amplifier.
  5. Check to ensure AC/DC adapter is connected to TV Box and AC outlet.
  6. Power on LCD/Monitor and TV Box (there is no need to power on Computer). TV Box has an “OFF” and “On” switch which is on top of the Box.
  7. If the all the connections are correctly installed, TV signal can be received, at this time, run “PRESET” menu to search TV (or cable) programs.

  How to Pre-Scan TV Channels:  

·         Setup the TV Channels by pressing menu (the yellow button on “remote control)

·         Use blue “vol+” button to select “SYSTEM”

·         Use blue “P-“ button to select “TUNE-SYS”

·         Use blue “VOL-“ & “VOL+” to select “AIR” (or “CABLE”)

·         Press yellow “menu” button

·         Use blue “VOL+” button to select “PRESET”

·         Use blue “P-“ button to select “Auto-Tune” to pre-scan the channels

·         Press yellow “menu” button  

  1. You can also connect the MMI cable with the MMI interface on TV Box. Link the Video output or S-video output from multimedia equipment with the Video input (Yellow interface) or S-video input (Black interface) of MMI Audio/Video (AV) Cable, and then Link the Audio output from multimedia equipment with the Audio input (Red and White) of MMI AV cable.
  1. Power: Power On/off Switch
  2. Mute: Press this Button, sound disappear . Repress this button or " VOL - " " VOL +" , sound resume.
  3. Back: Return to the former program that you watched
  4. Time: the unit will turn off automatically if set the timing
  5. DIS: display the program number you watched at the moment
  6. Mode: Four modes of picture switch: " Standard", "Soft", "Bright" and "setting"
  7. AV : Press this button to select TV, oR S-Video.
  8. " CH + " ( Channel selection button) : numbers of channel will increase.
  9. " CH - " : numbers of channel will decrease.
  10. " CALE" Press it to show days , month, year and date of week, which also can be show through CH+/-, VOL+/- button
  11. VOL +/- : volume increase / decrease.
  12. Menu: enter into main menu mode and use " Vol+ " button or " vol -" to select the item for adjustment. Then use "CH +" or " CH -" to select the parameter adjusted
  13. Renovation: Renovation adjust. Picture turn left ( PC mode).
  14. Resolutions rate adjust. Picture Turn right (PC mode)
  15. View : scan the programs
  16. Still :press this button the picture will be still. REpress this button then picture restore.
  17. PIP: Turn on / off Picture in Picture functions
  18. PC: Enter into PC mode. Then Press the AV button to return
  19. EQ Selec the sound field.

 
Home | About Us | Where to Buy | Support | Contact Us

© Zurotech 2007